Ferolite 'Steel'
-For low and medium stress conditions.
-For With wire reinforcement.
-For air, water, steam, saline solution, Alkalies, ammonia and mildly aggressive media.
Specification Compliance
NO STANDARD EXIST FOR WAIR REINFORCED SHEETS
Properties Applicable for 1.5 mm thick material as per) |
IS 2712/1998 |
Density) |
1.8-2.2 gm/cm3 |
Tensile Strenght) |
> >8.0 Mpa. |
Compressibility) |
6-14% |
Recovery) |
>40% |
Stress Relaxation) |
---- |
Ignition Loss) |
<28% |
FLUID ABSORPTION) |
--- |
Water) |
|
Mass Increase) |
|
In ASTM OIL No.3) |
|
Thickness Increase) |
|
Mass Increase) |
|
In FUEL B) |
|
Thickness Increase) |
|
Mass Increase) |
|
In IRM 903) |
|
Thickness Increase) |
|
Mass Increase) |
|
Sulphuric Acid (96%)) |
|
Thickness Increase) |
|
Tensile Strength Decrease) |
> |
Nitric Acid (95%)) |
|
Thickness Increase) |
|
Tensile Strength Decrease) |
|
Peak Temp oc) |
415 |
max. Operating Pressure Kg/cm2) |
80 |