Ferolit 'Special'
-For high stress conditions.
-For motor oil, transmissions and hydraulic fluids, low temp. oil, Steam Alcalies, anti freeze, refrigerating oil.
-For IC Engines, compressors, chemical plants, hot oil tar oil & chlorinated & aromatic hydrocarbon.
Specification Compliance
IS 2712/1998 Grade W/1, 0/1
ASTM:F104 F 112330 M7
JIS:R3453(1985)Type-1
BS: 2815-1973 Grade A
BS: 1832-1991 Grade A
Properties Applicable for 1.5 mm thick material as per) |
IS 2712/1998 |
Density) |
1.7-2.2gm/cm3 |
Tensile Strenght) |
>26.0 Mpa. |
Compressibility) |
6-14% |
Recovery) |
>40% |
Stress Relaxation) |
23.0 Mpa. |
Ignition Loss) |
<28% |
FLUID ABSORPTION) |
--- |
Water) |
|
Mass Increase) |
<10% |
In ASTM OIL No.3) |
|
Thickness Increase) |
<25% |
Mass Increase) |
<20% |
In FUEL B) |
|
Thickness Increase) |
<20% |
Mass Increase) |
<20% |
In IRM 903) |
|
Thickness Increase) |
|
Mass Increase) |
|
Sulphuric Acid (96%)) |
|
Thickness Increase) |
|
Tensile Strength Decrease) |
|
Nitric Acid (95%)) |
|
Thickness Increase) |
|
Tensile Strength Decrease) |
|
Peak Temp oc) |
550 |
max. Operating Pressure Kg/cm2) |
150 |